Tooth Description
SH Tooth:
SH teeth This tooth shape is complementary to the tensile teeth and can be adapted to the different needs of cutting hard and soft. The design features of the double back angle teeth make them excellent for sawing hollow and thin-walled materials, such as pipe fittings and shaped parts. This configuration of one high and one low tooth shape can effectively reduce the sawing resistance, while balancing the force of different teeth, thus improving cutting efficiency and precision.
The back of the two rear angles constitute the tooth shape, the difference between the two 8 ° - 12 °, can increase the strength of the teeth, but relatively smaller than the turtleback teeth chip space. Easy cutting, low noise, wear-resistant teeth.
Dimensions | Tooth Pitch |
mm | 3/4 | 2/3 | 1.4/2.0 | 1.0/1.5 | 0.85/1.3 | 0.75/1.0 |
27X0.90 | √ | √ |
|
|
|
|
34X1.10 | √ | √ |
|
|
|
|
41X1.30 |
| √ | √ | √ |
|
|
54X1.60 |
| √ | √ | √ | √ |
|
67X1.60 |
| √ | √ | √ | √ | √ |
80X1.60 |
|
|
| √ | √ | √ |
Application
Scope of application: Widely used in medium or large tooth pitch band saw blades, especially in sawing harder materials with difficult cutting or large cross-section workpieces have obvious advantages and are extremely widely used.